+91-22-23894513 | info@reliablepipestubesltd.com

FBE External Coating Pipe Manufacturers

FBE External Coating Pipe
Fusion Bonded Epoxy External Coating Pipe
FBE External Coating Pipe


Buy cut to size Fusion Bonded Epoxy External Coating Pipe at a very low price in India

fbe external coating pipe manufacturers manufacture pipes that are coated with fusion bonded epoxy resins. Reliable Pipes Tubes Ltd. is one of the leading fbe external coating pipe manufacturers. The epoxy resin coating is fusion bonded with the surface of the pipe. To make this process smooth, the pipes are first blast cleaned. They could be soda blasted or sand blasted. Other abrasive materials are also used in blast cleaning. The fbe external pipe coating is first applied with an epoxy resin layer by electrostatically registering the epoxy resin. Then a polyester layer is applied on top of the epoxy resin layer to protect the epoxy resin from peeling off from the pipe.

The type of epoxy resin and the polyester layer differ from one type of pipe to the other and for the different applications. The fbe external coating pipeline is costly for the first installment but it reduces replacements by avoiding corrosion and damage to the pipe. The pipes last longer and the pipeline is intact from corrosion due to UV radiation, running water and atmospheric gases. The fbe external coating therefore is applied on offshore, onshore, chemical, domestic and commercial applications that require lasting longer with less maintenance. Please contact us for more information and pricing.

FBE External Coating Pipe

Fusion bonded epoxy coating on steel pipes in diameter ranges from 25 mm to 3000 mm are available. This coating provides excellent corrosion resistance, resistance to cathodic disbondment and chemical resistance. Once applied and cured, the epoxy film exhibits an extremely hard surface with excellent adhesion to the steel surface. In addition to the chemical and adhesive properties of the epoxy powder, the polyethylene coating system provides physical and mechanical advantages. FBE Non-slip coating system provides a rough, non-slip surface for a pipeline that will subsequently be concrete-coated.


Fusion bonded epoxy External Coating Pipeline protection at the following operating temperatures
  • Three-layer polypropylene: suitable for temperatures between -40ºC and 110ºC
  • Three-layer polyethylene: suitable for temperatures between -40ºC and 85ºC


FBE External Coating thickness:
  • External coating: Maximum up to 750 microns
  • Internal lining: Maximum up to 750 microns


Standards of FBE External Coating
  • CSA Z245.20
  • AWWA C 213
  • IS 3589 Annex C
  • ISO 21809-2


We offer FBE External Coating Pipeline dimensions, pressure rating and weight chart online


Benefit of FBE External Coating
  • Excellent cathodic disbondment test results
  • FBE coating can be applied from diameters 25 mm to 3000 mm with lengths of up to 12m.
  • Operating temperature range -40o C to 100o C.
  • FBE Coating prevents steel pipe from corrosion.



© 2020 RELIABLE PIPES & TUBES LTD. All rights reserved.